Monday, October 26, 2026

Monday miscellany

in which our plucky heroine has a good day...

including a long phone chat with my beloved SIL Barb. Got to hear about their anniversary trip to Spain, and she is sending me photos.

Today remained rainy and cool, and I'm definitely switched to cold weather layering. Wool cardigan + canvas chore jacket + rain capelet (+ handknit fingerless gloves) was just right for riding to the library.
※※※

~ fresh green color... ~
Very pleased with the effects. Sanding down the edges of the wooden pieces, and the textured weave of the fabric really make the piece look "of its times". The needlepoint pillow is a bit large, but since I embroidered it about 50 years ago, I just couldn't resist including it. 
※※※

Cleared over a third of the clutter from the bedroom, and put aside almost a grocery bag full of random fabric scraps to discard (too small to send out for reuse), a good start on the 3 bags full challenge. 

Two racks of dishes washed today, which means that by the end of tomorrow all the dishes will be washed and put away, ready for me to create more kitchen havoc. There are Acantha's apples to be turned into applesauce, and quinces to be baked and become various treats.
※※※

Finally got back to the next step on the herringbone pinafore, and bound the neckline edge with the textured silk. It is thin enough to make a nice narrow binding. Am hoping there is still some leftover herringbone somewhere to add another inch or two to the bottom bodice edge. Incremental progress is still progress...
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair wheels for 2nd RÅSKOGgreenwaste bin
2 laser cut trinket shelvestidy living roomrecycle bin
3 vortex bottlesfiles for tiny plant pot recycle bin
4 2 wee Dala horses - greenwaste bin
5 miniature spider plant- recycle bin
6  tiny picture frames x
x
7 mini rocking chair x x
8 x x x
9 x x x

today's gratitudes -
- managed to get out on my bike for a few errands when it was only damp and drizzly, not dumping rain.
- library had the book I put on hold waiting for me, full of tutorials for making faux houseplants from paper. While intended to make life size plants, I'm figuring that the designs and suggestions will be applicable to miniatures as well.
- a beautiful dichroic glass pendant with a triskele motif, as a thank you gift from Cynthia for coordinating the Advent Swap.

Time of Isolation - Day 2291

Sunday snippets

in which our plucky heroine remains obsessed...

Working on it betwixt chores, self care, and online visiting, the 1:12 scale MCM rocking chair is almost completed. The olive green fabric does make a convincing textured upholstery and I am that much closer to the vignette in my imagination. There will be at least a few more house plants, and now I'm thinking a mobile as well. The rounded cone miniature planter pot I designed in Tinkercad was printable and turned out well. Research informed me that they are described as "bullet planters", and were made in a variety of sizes, which is convenient for scaling the model(s) I may want to print. 
※※※

~ basswood, walnut, and black acrylic ~
These frames will make my miniature artworks look much more complete. And after all, since Kenya runs an art gallery, there must needs be some extra frames around the place... (plus there are enough of the 1¼" square frames for an entire additional set of Advent treats, maybe a hand-colored block print?) 
※※※

found a haven of mutuality over in Alberta earlier this week, and finally have a place was able to donate the two excellent (but not suitable for me) unused tubes of foot lotion. 
※※※

Though there aren't as many folks participating in the advent swap as in years past, there are still some, and so it will be able to happen, albeit probably with some duplication of items.
※※※

This weekend, wanting a handwork project suitable for knitting while video chatting, I started on a knitted combination earmuff/headband thing that the bike helmet chin straps slide through the ends and the headband adds a bit of warmth and keeps the "earmuffs" up near the ears where they can do some good. It is a free Ravelry pattern, designed by someone who lives in Madison, Wisconsin and has over 700 already made projects. Acquiring size 6 double pointed needles took a bit of doing, involving almost a 14 mile round trip on my bicycle, but in the end, needles were acquired and the knitting has begun. When this is completed, it will be time to start the cardigan.
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair wheels for 2nd RÅSKOGgreenwaste bin
2 laser cut trinket shelvestidy living roomrecycle bin
3 vortex bottlesfiles for tiny plant pot recycle bin
4 2 wee Dala horses - greenwaste bin
5 miniature spider plant- recycle bin
6  tiny picture frames x
x
7 mini rocking chair x x
8 x x x
9 x x x

today's gratitudes -
- found locally grown yummy salad mix. Spendy but worthwhile.
- got my COVID vaccine on Friday
- leftover pancakes make good flatbread
- on Saturday, I rode my bike for over 14 miles. No wonder I was a bit tuckered out!

Time of Isolation - Day 2290

Wednesday, October 21, 2026

practice makes progress...

in which our plucky heroine is still obsessed...

with continuing to learn how to use TinkerCAD. Before the laser cutting session at the library, I put together a file for a collection of tiny plain modern picture frames in small, medium, large, extra large, and "Advent-sized" squares. Creating even the simplest of digital designs is still very challenging while continuing to learn (and trying to remember) how to do even very basic tasks in the program. I managed to cut out several copies of the file in both basswood and walnut veneered plywood today at the library, and now have LOTS of frames available for adding a finishing touch to tinyworld art.
※※※

~ small but worthwhile ~
Am all kinds of happy with how the tiny spider plant turned out. It was an absorbing singular make, and has charmed everyone who sees it. (I brought it to the library makerspace to show to folks what I have been doing with the objects I've been creating)
※※※

Today was a long long bike ride day, all the way to the other end of Alberta, since I wanted to see if the Glerups with the rubber sole were available at Pie Footwear. Sadly only in the "boot" style (which wouldn't work with the dang ankle brace), but at least I now know what size I wear (38) and can track down the style I want online.

Since Bolt Fabric Boutique is on the same block, seemed like a good chance to see if there was any fabric that would work well for mini upholstery. Yes indeed, since I couldn't choose, a wee bit of Essex yarn-dyed and also of Kokka dobby both came home, . Both ⅛ yd pieces are in shades of a nice olive-y green that seems MCM adjacent and reminds me of furniture from my younger days.
※※※

Saw a house while out riding through Alberta Arts district that made me laugh. The residents had turned the entire front of a two story house into a spooky season face using simple white paper cutouts:  the two upper story windows were each made into googly eyes, and the small roof above the front door had a "bunting" attached of pointy teeth, turning the door into a mouth. Clever, and simple! 
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair wheels for 2nd RÅSKOGgreenwaste bin
2 laser cut trinket shelvestidy living roomrecycle bin
3 vortex bottlesfiles for tiny plant pot recycle bin
4 2 wee Dala horses - -
5 miniature spider plant- -
6 62 tiny picture frames x
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
- many many laser cut miniature picture frames
- mini Monstera leaves cut using the PCC Cricut machine
- Bolt Fabrics will cut and sell ⅛ yd pieces of fabric
- Vesta's box of Advent goodies arrived today

Time of Isolation - Day 2286

Monday, October 19, 2026

Monday miscellany

in which our plucky heroine may be improving...

Headache does seem to be fading, and while not as much is getting done as desired, there is some slow progress. Today I had the idea to set myself an ongoing challenge "three bags full": to go through the house finding things to declutter, recycle, and rehome. But instead of taking that to heart, I ran away in the middle of the sunshiny day to the post office and the makerspace. Tomorrow will be soon enough for more house tasks, like picking the rest of the quinces, sorting through detritus, and catching up on Mt Washmore. 

Today there were two more additions to this years Advent Swap participants: Donna package of treats arrived in my mailbox, and Helga dropped off her contribution this afternoon while I was out gallivanting running errands and cutting out leaves at PCC.
※※※

~ a small selection ~
Origami paper makes good tiny gift wrappings. These are not for the Advent Swap, but are now on their way to my pal Cricket. I've been gathering an assortment of found and/or made tinyworld treats to send to her for months now, and finally managed to get them all wrapped and posted...
※※※

In natural world news: TIL that fuschia berries are edible. After some online research, I tried eating one. It had a mild slightly sweet flavor. Apparently all parts of the plant are edible! Since this year there are many many berries on my hardy fuschia I am going to pick them for future experiments... (scones? preserves? garnish for museli?)
※※※

This triskele ball is an intriguingly shaped object cleverly made, and could be decorated in various ways. I imagine block printing...
 
※※※

Today I once again went out in the middle of the day to the PCC Makerspace, this time to use their Cricut machine to cut out monstera leaves (for a second plant for Kenya's future room) Cansons colored paper worked really well for that, and the instructional video shows using watercolor paint to add more depth and variation to the leaves.

The tiny spider plant is coming along well. I've been combining advice from assorted video tutorials to find something that works, using what materials are on hand here: paper colored with markers, colored pencils, and white gelli pen. Tape along the bottom edge, then rolled and glued. Unplied a bit of linen? twine then used white glue to smooth and strengthen the single ply to use for stems, and some of the left over snippets of paper and twine will turn into spider plant babies. Wonder if it may need a macrame hanger...
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair wheels for 2nd RÅSKOGgreenwaste bin
2 laser cut trinket shelvestidy living roomrecycle bin
3 vortex bottles- recycle bin
4 2 wee Dala horses - -
5 -- -
6 x x
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
- My ballot wasn't lost, just a day late... Informed delivery showed it arriving on Saturday, but nope. Thankfully it was in the mailbox today, though I had already tagged it as missing.
- A tiny spider plant made from paper and thread is adorable
- My aching head is gradually becoming less obtrusive (though I still feel less than 100%.) Don't feel poorly enough to need any medical attention, but don't feel quite right. Took a nap for several hours this afternoon, and am glad I have a life where I can rest when needed
- was able to find a sheet of inexpensive block printing paper at the art store to use with the fern cutter, and that will also be useful for the new tiny eraser stamp book I want to make.
- the front porch wind chime never fails to brighten my spirit when at random times a breeze calls up some notes

Time of Isolation - Day 2284

Friday, October 16, 2026

Friday fragments

in which our plucky heroine is delighted!...

Exciting news! The first package of this years advent swap goodies has arrived here at Acorn Cottage today ~ Huzzah for Courtney Jensen !! I was surprised and pleased to find a package waiting in the new "delivery Box Of Holding" on the front porch here
※※※

~ autumnal ~
Sometimes I cannot resist getting myself a treat, rather like the lolly pop after doctor visits as a child. Since there were 2 difficult tasks in the last week, I now have two different botanical punches, a small one that makes a sort of fern, and an even smaller one that makes oak leaves. I've not yet found the right sort of paper for them, but the oak leaf punch works wonderfully on actual autumn leaves...
※※※

I woke up with a headache. I hope I am not sick with the dreaded virus; took my temperature since usually headache means I have a fever, but nope. Just an all day headache. I don't feel sick, but I don't feel my usual self either. Early bedtime tonight and fingers crossed that helps. Several folks I know (though not local to me) got COVID in the last week or so.  
※※※

Yesterday I rode my bike over to PCC and used the laser cutter on some 3mm birch plywood for the miniature MCM rocking chair sides and arm pieces. I've since been smoothing the perpendicular cut edges into a more rounded sculptural shape similar to the original. Really pleased at how much of a difference that makes. Next step will be to rummage in my fabric scraps for some suitable fabric to upholster the seat and back. Since BaharMiniature mentions in their comments that the rocker was based on the (vintage John Lewis) "Hendricks" chair, I was able to locate an image of the original for additional inspiration: 
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair wheels for 2nd RÅSKOGgreenwaste bin
2 laser cut trinket shelvestidy living roomrecycle bin
3 vortex bottles- recycle bin
4 2 wee Dala horses - -
5 -- -
6 x x
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
- rounding the edges of the 3mm laser cut plywood definitely makes it look more like furniture...
- made good use of the unseasonably hot weather today by washing and line-drying all the pillowcases and the Moody Blues coverlet
- my friend Cricket has completed her cancer treatments

Time of Isolation - Day 2281

Wednesday, October 14, 2026

mindweek miniatures

in which our plucky heroine appreciates the small things in life...

My current "obsession" with tinyworld creations is in direct contrast to the larger bright world. It harms no one to take some time every day to do creative or whimsical activity, as long as daily care tasks also get done, and effort also towards leaving the world in as good or better shape as before. I do my best to fulfill all those directives.
※※※ 

~ so very small ~
In the remaining time in the library makerspace workshop yesterday, after printing out the tiny planter design I created in TinkerCAD, I decided to try to extremely shrink a Dala horse design (from the free files) down to a bit less than 1cm. The limiting factor was the size of the extrusion nozzle in the equipment, which is why they appear slightly "grainy". It was a successful experiment none the less, as these little horses, barely bigger than my morning vitamin pills, will make great tinyworld decor for a dollhouse shelf or mantel.
.
※※※

I an a materialist. my memories of the world are material concepts, not sounds or images, or people. I woke today just before 5 am from a dream of the 70's world. I am in a room with a hifi and I carefully clean the next record with the little brush made of plush and walnut. The sofas are low upholstered wood with integral storage backs for the records, there are hanging plants and low ceilings. It is an analog of the Radlos house in Boxborough. I am brushing my hair, but I am an analog me with thick dark straight hair. We are waiting for more friends to arrive. Then I wake up in my own bed, in this other 21st century dumpsterfire timeline. I wonder, as the sun rises in my east facing bedroom window in the bright world if my being a materialist is related to my aphantasia, and which came first...
※※※

Today was my appointment to see the podiatry doctor about my cranky left foot. He asked a few questions, moved my foot in several directions, and had me push against his hand with my foot also in several directions. The diagnosis is peroneal tendonitis in my left foot. The treatment is to wear a brace to limit the movement in the left ankle for a month in the hope of seeing improvement.

It was quite difficult to handle the layers of lacing and velcro elastic that comprise the brace to my foot, due to the combination of very short dinosaur arms and not being particularly limber. I needed to  catch my breath and sit for a few minutes afterwards to let the pain in my hip and shoulders abate. As well, I was barely able to squeeze my now braced foot into my everyday shoe to go home afterwards. Still, if it helps my foot heal, without causing corollary damage elsewhere, it will be a worthwhile effort.

Once home my very first act was to remove my shoes and put on my felted wool slippers. Much relief. It turns out also possible to wear my plastic Birkenstock garden clogs, but I'm thinking about ordering another pair of wool Glerups clogs, since they now have a version with a rubber sole suitable for outdoor use.   
※※※

Finding online TinkerCAD tutorials is very similar to finding online knitting tutorials - some are more easily understood than others for the same tasks. I've been rebuilding digital files for my very basic decorative MCM planter. Eventually there will be a nice assortment of  "vintage" furniture for Kenya Ogidni's tinyworld space. Also have been looking at tutorials for 1:12 scale house plants, which are very appropriate. While at the grocery store today I remembered seeing a while back that there was local brewery beer can decorated with a Carson Ellis blue on white harbor scene. How could I resist? Even though I loathe beer, it can be cut open to make a 5" wide x 4" tall mural for some tinyworld wall. Maybe a kitchen, or bathing room?
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair wheels for 2nd RÅSKOGgreenwaste bin
2 laser cut trinket shelvestidy living roomrecycle bin
3 vortex bottles- recycle bin
4 2 wee Dala horses - -
5 -- -
6 x x
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
- a very pretty lampwork bead found in the bike lane
- my sad left foot probably has tendonitis, not something worse
- the 3M abrasive discs for my flex shaft, useful for more than metal.

Time of Isolation - Day 2279

Saturday, October 10, 2026

Saturday snippets

in which our plucky heroine notices visible progress...

Decided to go to the large farmers market today to use the remaining senior scrip before it expired, hoping for some of the farm exchange dark maple syrup. Flying Coyote brings it in from Vermont. Since it cost less than I remembered, was able to also get some beautiful Japanese eggplants*.  I also remembered to check the model train hobby store and was able to acquire a strip of 1/32" basswood to cut up to back the trinket shelves. All before noon. 
※※※

~ faux Noguchi ~
Thursday afternoon decided that a visit to the PCP makerspace would improve my mood. Was able to cut out pieces for two different MCM miniatures: the frame for a rocking chair (very much like one Rois and Chance had) and the base and top for a faux Noguchi coffee table. All the wood parts for both pieces will need a fair amount of finish work, but with sanding and staining they should turn out quite lovely and a good accompaniment to the Wishbone chair. 
※※※

In the desire to not be limited by models others have created, our plucky heroine has been trying to become familiar with TinkerCAD. May have successfully created two objects: a planter pot to be 3D printed and a pot riser to be laser cut. I won't know until I can get to a makerspace next week to find out if they will actually turn out as I hope, but after several hours of online efforts, they seem to look as I desired, and are hopefully the right size. Wish me luck...
※※※

Thursday started out scrambled, as my appointment with Dr N was not at the new location and there was no way for me to get to the old office in the time remaining. Bah! Had to reschedule. Next time I will double check location when scheduling an appointment. Had to reschedule, fortunately the following week. Saturday my left foot was really bad again. I wish I could figure out why it is unhappy.
※※※

Body doubling is probably my favorite effective task initiation strategy. It seems to work for me even over video chat. On Thursday spent several hours online with Ursel, doing my best to tidy up the  living room and kitchen. While the impetus for this effort was the imminent arrival of the tax accountant on Friday afternoon, the tidy space has vastly improved my sense of well being. Got enough done that day and the next morning to return the room to "company ready"
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair wheels for 2nd RÅSKOGgreenwaste bin
2 3 laser cut walnut trinket shelvestidy living roomrecycle bin
3 vortex bottles- recycle bin
4 - - -
5 -- -
6 x x
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
- was able to locate a new Luci solar bike light on eBay
- tiny trinket shelf layers are glued together, and I was able to kitbash pieces of the miscut to enlarge one (which will add variety)
- managed to time my excursions today to avoid being rained on

Time of Isolation - Day 2275


*
"5 Flavor Eggplant"
(savory, salty, sweet, sour, spicy)

about 2# long skinny eggplant 
1 tablespoon salt 
1½ tablespoon tamari 
1 tablespoon vinegar 
1 tablespoon sugar 
1 teaspoon cornstarch 
2 tablespoon oil 
+ hotness as desired

put the salt in a big bowl, add several cups of water, and then clean and cut up eggplants, tossing the bits into the bowl of salt water - I cut them first the long ways into quarters or sixths, then cut the long pieces into chunks. I try for about ¾" cubes more or less by volume, because big pieces take a long time to cook through, and undercooked eggplant is nasty.

when all the eggplant is in the bowl of salty water, it sits there for a half hour... I occasionally stir it or push the chunks around to make sure they all get drenched... you want to have enough water that they are all floating.

Meanwhile, combine the tamari, the vinegar, the sugar, and the cornstarch. Drain and dry the eggplant bits. (my current innovation is to use my salad spinner after pouring off as much of the water as I can)

In a big frying pan, heat up the oil, then fry the eggplant until it is FULLY COOKED and slightly browned. (Trust me, you want it cooked till it is SOFT, not al dente) Pour the sauce mixture over the eggplant (give the sauce mixture a good stirring up just before you pour it), and cook til thick, which will take only a few moments, because cornstarch...

At this point, I usually add some awesome sauce (spicy chili jam) but you could add a dash of tabasco, or sriacha, or whatever you prefer. The original recipe called for adding jalapeno peppers at the beginning, but that was WAY TOO HOT for me. YMMV, and the spicy aspect is entirely optional for that matter.

Truly, this recipe is almost faster to cook than to read, most of the effort is in cutting up the eggplants, and in waiting while they soak in the salty water. I had always in the past done the sprinkle the eggplant with salt, let it drain, rinse it off thing, which is a whole lot of faffing about. I had never heard of soaking them in lightly salted water, but it works really well!!

Wednesday, October 7, 2026

vortex bottles and other Wednesday whatnots

in which our plucky heroine is absorbed by the small...

Yesterday spent more time with the laser cutter at the library, mostly figuring out how to use the attached software to create the grid for tiny trinket shelves. After much time struggling to remember what I'd done 2 weeks ago, asking for help made a big difference and led to success at last. Time and practice will hopefully make turning design ideas into cut files easier.

Between time there and time today at the PCC makerspace, was able to generate a number of components. These still need to be glued together in pairs, as a 3mm deep shelf is Very Shallow indeed! And they will also need to have a solid thin wood backing attached.

How very silly it turned out to be that what smelled appetisingly like smoked fish all Tuesday evening was really the small bits of laser cut walnut forgotten in my dress pocket?! (After laser cutting the first grids for trinket shelves, there were many many small rectangles remaining that seemed worth thinking about what sort of miniature they might be turned into rather than just discarded.)
※※※

~ 1, 2, 3, many... ~
The laser cutter works so quickly! It only takes a few minutes to cut out a half dozen of these 1:12 scale trinket shelf grids from walnut plywood. It will be a fun challenge finding assorted miniature items to fill the shelves, once they are assembled. 
※※※

In additional tinyworld makerie, the cap of an eye drops bottle has been turned into a miniature MCM flower vase, first by applying blue paint to the knurled part of the cap giving a striped effect, then painting on several layers of nail varnish for a shiny "glazed" surface. Drilled out the center of the tip and covered up the open end with cardstock.  Now all it needs is a coffee table or display shelf. The shape is surprisingly lovely, and am wondering if others could be painted differently for variety sake and/or to share
※※※

Yet another tiny treat today, as the "potion creating" station at the makerspace has been set up all this week as part of their spooky season activities. What they call potions, are what I think of as Vortex Bottles, remembering the booth at OCF that was filled with many recycled glass bottles large and small with different colors of swirling sparkle inside. Turns out the effect is made by combining isopropyl alcohol, vegetable glycerine, and mica powder. Two of the 1" tall wee glass vials now contain a dark and a light golden swirling vortex, and on Acantha's advice, I used sealing wax to cover the cork stoppers, holding them in place and preventing evaporation. 
※※※

In an earlier frenzy of Etsy shopping, I ordered the pattern to make a beaded giraffe charm for Kestrel,  and (also/unrelatedly) ordered punches to cut very tiny leaves.  Have been dreaming of making miniature botanical arrangements and house plants. Also am mulling over how to design the tiny MCM plant pot holder for laser cutting and how to generate the shape for a matching tiny plant pot in TinkerCAD. Since said pot is simply a hollowed out cylinder, my hope is it won't be too difficult. Need to look up some video tutorials from the "University of YouTube...
※※※

Monday, while video visiting with Mischa, we got to chatting about singing, that being an activity impossible over zoom. This sent me down the rabbit hole to events at Spring Hill decades ago, and the performances by On Wings Of Song. Like much else of the niche music from my younger days, there is no digital audio available, but there are old LP's out there to be purchased,. And, the assorted  hi fi components (turntable, speakers, etc) are also long lost in the mists of time and moving, so there would be no way to listen to older music without also creating space and a setup for such. Not a project I want to take on currently, but perhaps could be an incentive for deeper decluttering. I really don't need another hobby, though it is entertaining to think about. 
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair wheels for 2nd RÅSKOGgreenwaste bin
2 3 laser cut walnut trinket shelves-recycle bin
3 vortex bottles- -
4 - - -
5 -- -
6 x x
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
- Albina Library had USB sticks available
- swirly sparkly vortex bottles 
- got to hear some wonderful live music back in the day

Time of Isolation - Day 2272

Monday, October 5, 2026

Monday miscellany

in which our plucky heroine switches gears...

Today I rode over to PCC, only to find out on further discussion with helpful folks there that it is actually not advised to store things like medication in 3D printed containers. Sigh. There goes the idea of using the Helia files to make a pill case for Mischa. Now I am wondering what those files could be used for? (bead storage? stitch markers? small earrings or components of some kind? or???) So, was instead able to print out better detailed RÅSKOG wheels for my photo series. Also this week they have a "potion making" station set up with the ingredients to make some of those wonderful swirling metallic bottles (glycerin, alcohol, and colored mica powder), and I intend to make a few for the tinyworld... Tomorrow is also the laser cutter workshop at the library, and I intend to make progress on my trinket shelf project, now that we have determined that 1mm dividers are possible
※※※

~ the big pocket ~
This started life as a tee shirt, but since our plucky heroine never wears tee shirts, it is being transmogrified into the front pocket for a new pinafore. Cotton jersey isn't particularly sturdy, so after being narrowly edgebound to a backing of the same herringbone fabric as the garment, it is being "quilted" in place with many lines of running stitches. It is almost as large as the front bodice, and will serve to remind me of the years I spent living at the end of the Delphi Valley, just across the highway from the Blue Heron Bakery...
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair wheels for 2nd RÅSKOGgreenwaste bin
2 --recycle bin
3 -- -
4 - - -
5 -- -
6 x x
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
- the multi-brown ikat pinafore, from a wonderful thrifted wrap given to me by Marian, which makes me think of her and smile
- this morning's shower with the goat milk soap Drusa made, and the new sturdy replacement handheld shower. Am still delighted with how well it stays in place when showering, compared to the old one.
- while clearing the nightstand, found a pair of backup glasses that Past Me had cleverly ordered, which had been buried beneath the assorted moop that has accumulated next to the bed. Given the difficulty in finding frames that fit and that I like, this is a big win!

Time of Isolation - Day 2270

Saturday, October 3, 2026

Saturday snippets

in which our plucky heroine incrementally progresses...

Nothing new is completed, but various things are further along than they were. Which is basically the point.
※※※

Brenda Dayne on "Enough", a short nutritious essay well worth listening to. The topic gets more and more relevant as time passes
※※※

~ well begun ~
and about half done... Still want to give the chair a faux wood grain paint job, and create a thin leather cushion for the seat, as some of the full size ones have. This will probably live in the Caer Cardboard Art Gallery rather in the tinyfolk living spaces, as it is as much an art object as an actual chair, and also remains quite delicate/breakable. 
※※※

Today, while making breakfast, I was just about to open a new bag of flaxseed meal and noticed it was the Wrong Variety. "Golden"is what I meant to buy, as it has a lighter flavor and a smoother consistency in cereal than regular. Since the packaging is almost identical, and they cost the same, it was an easy mistake. Glad I noticed before opening it. Wasn't sure if it was possible to exchange it, since I hadn't saved the receipt, but the person at the service desk at Safeway was agreeable, much to my pleased surprise. Yay! 
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair -greenwaste bin
2 --recycle bin
3 -- -
4 - - -
5 -- -
6 x x
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
- being able to exchange the wrong flasxeed meal for the correct stuff
- red Bartlett pears
- In the no great loss without some gain, the fact that my expected houseguests sadly won't be visiting (due to COVID exposure) means I have a bit more time to do a really good job of tidying the house.

Time of Isolation - Day 2268

Thursday, October 1, 2026

more Thursday thoughts

in which our plucky heroine continues making plans for the month...

I intend to be making progress on the interminable raincoat project that only needs toggles and edgebinding to be completed; tidying the public spaces for guests later this month; posting about the Advent Swap every day; and possibly getting back to daily drawing with "teeny-tiny-tober" a month of drawing tiny pleasures (said drawings being no larger than 5cm x 5cm). After Beth and Karen's visit I am hoping to start exploring TinkerCAD.  And I want to do a photo essay of my tinyfolk going to Ikea, coming home with RÅSKOG, and figuring out how to assemble it.
※※※

~ it's iconic ~
The very delicate Wishbone chair model is almost ready for priming, now that the pieces are all glued together. After much hunting online it seems that acrylic gesso is entirely acceptable as a brush-on primer, which will be better than spray primer plus I already have several jars of gesso in different colors. 
※※※

"Very little is needed to make a happy life..." [ it is all within yourself in your way of thinking.]  - Marcus Aurelius, Meditations... That first bit would make a great bit of tinyworld wall calligraphic quote art.
※※※

I'm hoping to find the time to get over to see the "Everything Under A Mushroom" (a collection of smaller than normal objects) show at slowpoet gallery* which will be there between Oct 1 - Oct 15. 
※※※

October SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 tiny Wishbone chair -greenwaste bin
2 --recycle bin
3 -- -
4 - - -
5 -- -
6 x x
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
- Saw nuthatches again in the front yard.
- I can lie down and rest when I feel under the weather, which I did today, possibly from the flu shot yesterday afternoon
- The compression socks I ordered arrived, and the postie put the package in the new deck box (which I acquired particularly for that very purpose.

Time of Isolation - Day 2266

* 8842 SE Stark, 10/2 - 10/4 12-4pm, 10/8 - 10/11 12-4pm

not quite Thursday thoughts

in which our plucky heroine goes down the makerspace rabbit hole...

and also wishes there were two of me, as I have a brain full of creative ideas, and a house full of chores that need done.
※※※

~ rabbit rabbit rabbit ~
It will be a busy month, with fruit preserving not yet finished, guests visiting mid month, and more advent swap preparation. I intend to post as much as possible to encourage particiapation, aiming for a post a day of either possible projects, origami wrapping suggestions, and logistical information. How is it almost October already?
※※※

Rode to the Safeway pharmacy for a newly prescribed blood sugar monitor; apparently my old one needs replaced? The pharmacy there has the new Moderna mRNA flu vaccine (mFlusiva), so I am now up to date on my flu jab as well. Much less painful than the shingles jab.
※※※

Sigh... 3d printing on Tuesday at the library was cancelled, since the instructor was ill. Decided to check out the PCC makerspace, which is an easy bike ride and has more than just 3D printers, also has laser cutter, electronic soldering, cricut machine, and more. Currently free for community folks as long as students are given priority. The studio monitor set up the machines to print two of the projects in my files and also, when I mentioned I was hoping to eventually create my own models rather than simply use other folks designs showed me a bit of what TinkerCAD can do. I can hardly wait to give it a try!

Printing the Wishbone chair 1:12 scale model required much in the way of changing how it was oriented on the plate, and changing where the supports were, as well as cutting it in half to be glued together afterwards. I was very grateful for the help, as I don't yet know enough to make those changes. That model is sooooo very delicate that I broke one leg off, and then cracked the wishbone back as well. Thank goodness for superglue. I want to paint the model, but given the several repairs it needs to have a bit more smoothing done and then be primed. Need to find a PLA-compatible primer source.
※※※

September SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 8 sm jars plum sauce plums in freezergreenwaste bin
2 3D print Dala horseextension cords coiledrecycle bin
3 3D print plant standswind chime suspension recycle bin
4 3 pr dolly boots more plums frozen greenwaste bin
5 12+ jars elderberry syrupnew handheld shower-
6 16 jars Awesome sauce screen door painted x
7 kitchen algebra tag x x
8 RÅSKOG pieces
x x
9 x x x

today's gratitudes -
- found missing blue acorn earrings
- helpful monitor(s) at PCC makerspace
- the pieces of RÅSKOG fit in the faux cardboard box I made earlier.

Time of Isolation - Day 2265