Tuesday, January 21, 2025

Tuesday tidbits

in which our plucky heroine bundles up to keep warm...

on a cold if dry day, it seemed a good plan to put on my Keen boots to ride down to the post office this afternoon. The almost knee high leather makes a definite difference in comfort. I was able to bail out the postage due envelope, which contained the first set of items for the springtime art exchange

(I must make sure folks know that anything (even if it fits in an ordinary envelope) other than a few totally flat pieces of artwork on paper will be deemed a "parcel" by USPS. Parcels have different and more expensive postage, depending on both size and destination.
※※※

~ quick and easy ~

Checked out "Making Things: Finding Use, Meaning, and Satisfaction in Crafting Everyday Objects" from the library, because it was very pretty, and also new-to-me... while there wasn't tons of skillset info I didn't already have, this origami box (inspired by Sok Song's "magazine box") delighted me. It uses rectangular pieces of paper, is easy to fold up when a small temporary container is needed, and the folding sequence is easy to memorise.

(I disagree however with their avowal that two folded the same size will work well for bottom and lid; yes you can squoosh them together that way, and again would be just fine for very temporary, but a lid just slightly larger will work better)
※※※

The venerable set of tiny (smallest about the size of sewing needles) pentagonal broaches that I use for enlarging the holes in pearls (among other things) are probably at least 30 years old. Their plastic "handles" are starting to shatter, which renders them almost unuseable, since without the handles the angular sharp steel shafts are exposed.

After much research, I found "Milliput" a specific epoxy putty that seems an ideal substance to form new handles from. But said putty is not available anywhere I called in the city, indeed most of the places I found to purchase it were not in the US. As I've mentioned, I prefer to not patronise the behemoth that begins with "A"; fortunately I did find Atlas Preservation, who sell supplies for gravestone restoration! and they had several different colors and grades of Milliput. An order has been placed, and there will be future experiments. (Also ordered some terra cotta color, thinking that some wee little 1:12 planter pots may be possible? worth at try...)
※※※

Very incremental progress on my stripey cardigan sleeves... I need more practice on the jogless join, as I don't seem to be able to remember it from one round to the next. Must needs sit with the photo tutorial open in front of me each gorram time, or tink backwards to try again... Still, the eventual results will be a wooly bit of whimsy. At least that is my hope, since it looks nothing like my inspiration, and nothing like my sketch.
※※※

January SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 blood orange marmalade
bike headlamp
yard waste bin
2 heraldic enamel
passport photo
recycle bin
3 crayon roll
crystal necklace
recycle bin
4 xp2 undies
pattern longjanes
-
5 pot lid rack
passport applied for
-
6 x pear tree planted
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
1. the amount of delicious food I get from my plum thicket
2. figured out a way to use two circular needles instead of my preferred double points (which I don't have) and instead of "magic loop" (which I really dislike)
3. found a domestic and non behemoth source for Milliput

Time of Isolation - Day 1650

Monday, January 20, 2025

use what you have...

in which our plucky heroine is slow but steady...

and bearing in mind that the perfect is the enemy of the good, there now is a pot lid rack on the kitchen door...
※※※

~ it took three days ~
I've been using the top of the washing machine as a staging area for the assorted tools needed to make this project happen, though there were some detours to the tiny drill press for some nice perpendicular screw guide holes. Relieved the sharp edges of the very small angle brackets with files, as there must needs not be places where a careless hand might get cut.

There is no door between the entryway/living room, but there is a door between the kitchen and the workroom (which several owners ago was a garage). Most of the time, that door is left open, and the noren provide a visual border, though the door does get closed when stovetop cooking happens, because the smoke alarm is a very special snowflake and likes to scream at any steam arising...
... but now, behind the noren, there is a tidy line up of pot lids for those that can't be looped around their pot or pan handles, where they are easily accessible and entirely out of the way. I'll certainly be painting the door later on, when it is warm enough to have the windows open for a few hours, and may add labels for which pot or pan each lid is associated with.
It was pure good fortune that the space available on the door was just right for the four pot lids that needed to be stored there. Now I get to figure out what (if anything) needs to be in the spot above the bakers rack where the lids formerly lived
This is the structure of this whole project, made from bits and bobs from around the house... Since the wooden framework of the hollow core door was less than ¾" wide, the attachment points must also need be no more than ½" wide. Two pieces of scrap lumber cut square and glued and screwed perpendicular form the risers, with appropriate grain direction so all the screws are not going into end grain. Figuring all this out took far more time than it sounds like it should, aphantasia is not my friend.

There was also a fair amount of wrestling the two detached brackets in place, with the yardstick balanced atop so there was a spot to place the level, as the brackets need to not only anchor the cross piece level, but also need to be offset from the actual door edge just enough so the door can close! Our plucky heroine is right pleased that this turned out as well as it did, and that the pot lids will also be much easier to reach now.
※※※

January SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 blood orange marmalade
bike headlamp
yard waste bin
2 heraldic enamel
passport photo
recycle bin
3 crayon roll
crystal necklace
recycle bin
4 xp2 undies
pattern longjanes
-
5 pot lid rack
passport applied for
-
6 x pear tree planted
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
1. Pot lid rack successfully completed
2. A bike ride on a cold day, all the way out past St Johns, for a total of 8K steps
3. Had a chance to talk with my brother on the phone
4. New social media "diet" may be why my chronic nightmares have decreased. I know that correlation is not causation, but am hopeful nonetheless

Time of Isolation - Day 1649

Sunday, January 19, 2025

a slow Sunday

in which our plucky heroine is still not a woodworker...

...though somewhat obsessively continuing to glue and file and drill and assemble parts. I hope it will all work as I have imagined, once it is properly attached to the door. And I cannot paint the door until warm weather returns, so will remain a bit kludgy looking till then. Incremental progress is still progress.
※※※

When preparing ingredients for the lasagna earlier, it occurred to me that one of the glass weights for fermentation would also work really well to hold the dried mushrooms under the boiled water to rehydrate, which means the weights are not single use.
※※※

Almost a sixth of the way done with the stripey sleeves. The benefit of using scraps for stripes means partial balls of yarn get used up. The drawback is many many yarn ends to weave in. I am alternating sleeves, doing only a few rows at a time, to avoid second sleeve syndrome. Also the design changes color almost every row, after three inches, there were so many ends I had to stop and weave them all in before continuing, and will have this as a policy decision. I hope that I like the cardigan when it is finished, and that it doesn't look too peculiar!


"...in the hall" said Tottie, "was the figure of a butler."
No one asked her why she said "the figure of a butler" instead of "a butler." They knew that whoever had made, or tried to make, that butler had not been successful. There are some dolls like that. There was no need to pity him because he had never been a butler.
    ~ from "The Dolls' House" by Rumer Godden


Thinking about what I like and don't like in books I read, and part of it is about real/not real... if the writer can create and describe characters that I care about, they take on a reality that makes me interested in knowing their story. There are many books where I long to know both what happens after the book ends, or what happened before, or the books that I re-read, sometimes repeatedly. Those, to me, are good books, whatever the genre. "Okay" books are ones that while I read the whole book, they don't really resonate for very long, the sort of books where I say "I think I may have read that, but I'm not sure". Then there are the books that I start, and decide, nope, not a book for me, for a whole assortment of reasons.
※※※

January SMART goals (x=extra)
# THINGS MADE THINGS FIXED THINGS GONE
1 blood orange marmalade
bike headlamp
yard waste bin
2 heraldic enamel
passport photo
recycle bin
3 crayon roll
crystal necklace
recycle bin
4 xp2 undies
pattern longjanes
-
5 -passport applied for
-
6 x pear tree planted
x
7 x x x
8 x x x
9 x x x

today's gratitudes -
1. slow but continued progress on the pot lid rack, also I found the wood putty, huzzah, and it was still useable
2. short visit with Helga, to give her the calendar
3. Ursel reminded me about vKWHSS* next weekend, which has several classes I want to attend. As a result, I have canceled Crafternoon next Sunday.

* virtual Known World Heraldic and Scribal Symposium

Time of Isolation - Day 1648